Balancer adapter plugs for the measuring inputs of the future-value A 10-lead adapter cable of 20 cm (about 8 inch) with a fitting 14 pin socket has to be connected to the 10 pins connector of the future-value. The adapters which are described below are mounted on the other end of the flat band rainbow cable. They shall match the balancing connector on your battery pack.

Order- information	Short description	Prices
FutValAdapt-TP8	Adapter for ThunderPower and/or FlightPower batteries Pin spacing 2.00 mm For 2s ... 8s packs.	with 19% V.A.T 19.90 € Shipping without V.A.T (16.72 €)
FutValAdapt-Ko6	Adapter for Kokam / Robbe / Graupner Akkus Pin spacing 2.54 mm For 2s ... 6s packs.	with 19% V.A.T 19.90 € Shipping without V.A.T (16.72 €)
FutValAdapt-Ko8	Adapter for Kokam / Robbe / Graupner Akkus Pin spacing 2.54 mm For 2s ... 8s packs.	with 19% V.A.T 19.90 € Shipping without V.A.T (16.72 €)
FutValAdapt-Ko2x4	Adapter for Kokam / Robbe / Graupner Akkus Pin spacing 2.54 mm For 2 packs of 2s ... 4s each in series connection.	with 19% V.A.T 19.90 € Shipping without V.A.T (16.72 €)

Order- information	Short description	Prices
tempsens-2	Temperature sensor fitting for future-xxl-40.300... as well as for nextGeneration chargers.	with 19% V.A.T 15,00 € Shipping without V.A.T (12,60 €)
tempsens-3	Temperature sensor fitting for future-l-.... and future-xl-....	with 19% V.A.T 12,17 € Shipping without V.A.T (10,23 €)
mcr-sss	HALL-rpm-sensor fitting for future-l-.... and future-xl-.... and future-xxl-.... Contains: rpm-sensor and 3 neodym-magnets	with 19% V.A.T 14.36 € Shipping without V.A.T (12.07 €)

Order information	Short description	Prices	HotLinks
USB-adapt-uni	Interface adaptor to connect to the 5 V-SIO connector of the nextGeneration series as well as to the LiPoCard2 und e.g.. also to the u-force speed controller and to the prog-adapt-alpha. Accessories not included: • USB-driver (load down here). • USB-cable (see below).	incl. 19% V.A.T. 30.00 € Shipping costs without V.A.T. (25.21 €)	Operating instructions
prog-adapt-µwave	Interface adapter to connect all µwave-receivers and the alpha-point-receivers, the newer speed controller series and on the other side the 5V-SIO connectors of the USB-adapt-uni or prog-adapt-uni cables.	incl. 19% V.A.T. 21.90 € Shipping costs without V.A.T. (18,40 €)	Operating instructions Applicated to the µwave4+2 or alpha-point Applicated to the µwave8 Applicated to the µwave12
USB-adapt-uni-Set	Interface adaptor set to connect to the 5 V-SIO connector of the nextGeneration series as well as to the LiPoCard2 und e.g.. also to the u-force speed controller and to the prog-adapt-alpha. Accessories included: • USB-stick with 128 MB • USB-driver on the stick. • USB-cable to connect to a PC.	incl. 19% V.A.T. 50.00 € Shipping costs without V.A.T. (42.02 €)	Operating instructions
USB-Stick128	USB-Stick with 128 MB Included on the stick: • USB driver for our USB interfaces. • Operating instructions for the nextGeneration charger/discharger series • NextGeneration firmware with different language pairs.	incl. 19% V.A.T. 15.99 € Shipping costs without V.A.T. (13.44 €)	Operating instructions
USB-Kabel	USB cable To connect our USB adaptors to the personal computer (PC). - A to B - 2 m - light grey -	incl. 19% V.A.T. 5.90 € Shipping costs without V.A.T. (4.96 €)	-
USB-Kabel-mini	USB cable with mini-USB socket To connect our newer speed controller series to the personal computer (PC). - A to mini-B - 2 m - light grey -	incl. 19% V.A.T. 5,90 € Shipping costs without V.A.T. (4,96 €)	-

	Order Term	Usage	Source of supply
	graphit 33	To make an electrical conductive coating on the helicopter belt drives to avoid statical charging.	Conrad Electronic SE www.conrad.de Order No.: 813826-93

accessories for helicopter speed governor devices

	Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
	aldis	alarm display, accessory for future-u series from V6 and mcr42 series since 1995. 10-32 Nickel cells.	35.91	(30.17)
	aldis-HV	alarm display, accessory for future-u series from V6 and mcr42 series since 1995. 10-32 Nickel cells and 3-14 Lithium cells.	60.00	(50.42)
	mcr-sss	sensor set, contains: rpm-sensor and 3 neodym-magnets	14.36	(12.07)
	mcr-sens	drehzahlsensor, einzeln	11.28	(9.48)
	mcr-mag	neodym-magnet, einzeln	1.03	(0.86)

push buttons, adapter-cables, transfer-cables

	Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
	prog-adapt- uni	Cable to connect devices with 5 volt SIO to a RS232 port (COMx) of personal computers. Level shift electronics integrated.	29.75	(25.00)
	prog-adapt-mcc	aktive 3-wire programming cable Centronics-Port PC <--> mcd/mcc series	29.75	(25.00)
	ptaster	programming and arming button for mounting in the fuselage (7mm hole)	6.16	(5.17)
	tast-vm	programming push-button and simple voltmeter. displays e.g. current value while programming procedure	19.49	(16.38)
	serkab-bec	servocable for slim_q, eagle ...	7.18	(6.03)
	serkab-swi	servocable as above, includes on/off switch	11.28	(9.48)
	schischa-ww	on/off switch for serkab-bec (to retrofit)	5.13	(4.31)

battery- and motor-cables for slowflyers

	Order Term	Content	EUR incl. V.A.T	EUR excl. V.A.T
	kab-slowfly	13 x 7 x 4 und 13 x 6 x 3 mm single, 24 mm plugged, 4g/pair, length each 8,5 cm	2.56	(2.16)

shottky diodes / interference suppression chokes / capacitors

	Order Term	Usage	EUR incl. V.A.T.	EUR excl. V.A.T.
	shottky diodes 35 V / 5 A	free running diodes for motors up to 24 cells / 25A. pack of 3	3.59	(3.02)
	choke-10µH/2A	smoothing the motor current at 100 kHz speed controllers. 10*5 mm, 1.4 g	1.95	(1.64)
	cap-220µF/63V	to compensate the additional cable inductivity of lengthen cables between battery and speed controller (future-40.160, smart-36.200) pack of 5 10*24 mm, 3 g each	10.26	(8.62)
	cap-330µF/50V	to compensate the additional cable inductivity of lengthen cables between battery and speed controller (future, smart) pack of 2 10*24 mm, 3 g each	5.13	(4.31)
	cap-330µF/16V	to compensate the additional cable inductivity of lengthen cables between battery and speed controller (future-9, future-11, slim) pack of 2 8*13 mm, 2 g each	4.10	(3.45)